Spare parts

Cheyenne brand 4mm banana plug cable adapter. Adapter with silicone cable to 4mm banana plug. Made in Germany. 16% VAT included

This adapter allows you to connect our standard cables with a 1/4" jack connector to a Cheyenne power supply. Simply connect this adapter to the 1/4‚ male connector on your cable (larger connector) and then plug the connector into your Cheyenne food source. Unlike...

connecting post The Eikon Round series of Binding posts are available in 4 configurations; Vertical back horizontal back Top #6 contact Top contact #8. Vertical back binding post are for mounting on the base of the frame. -Horizontal back binding post are for side...

Bishop Spring Pack with 3 Pieces Compatible only with Bishop Rotary V6 Official distributors 16% VAT included

BISHOP Pack with 3 lubricants 1 gr each sachet 16% VAT included

Spare part for Bishop Rotary V6 machines Cam & Bearing 3.5 Ideal for line, shadow, and fill. 16% VAT included

(Stroke, bearing) Spare part for Bishop Rotary V6 machines Cam & Bearing 4.2 long stroke Ideal for lines 16% VAT included

Cam (Stroke, bearing) for Bishop Fantom machines The 3.5 cam is our normal stroke: it comes with all machines and is ideal for black and gray shading, but will also pack in great color and very clean lines. Our extra long 4.2 stroke is...

(Stroke, bearing) Stroke Replacement Available in 3.5 and 4.2 Only compatible for MicroAngelo V2 machine 16% VAT included

EIKON capacitor It comes ready to install and no soldering is necessary - just screw the capacitor behind the connection brackets. Choosing the right capacitor for a machine depends on how you want your machine to operate. Capacitors with lower microfarad (uF) ratings create...

EIKON capacitor It comes ready to install and no soldering is necessary - just screw the capacitor behind the connection brackets. Choosing the right capacitor for a machine depends on how you want your machine to operate. Capacitors with lower microfarad (uF) ratings create faster...

Parts for Bishop Rotary High quality, almost indestructible clamp (Pipe clamp) Official Bishop Distributors 16% VAT included

Includes: 4 RCA converters 2 6-foot black RCA cables with quarter-inch mono plug. 16% VAT included

Pack of 5 replacement bars for the Spektra Edge and Edge X. Bars with a ball tip attached are for grip use that do not contain an internal alignment guide 16% VAT included

Pack of 5 replacement bars for the Spektra Edge and Edge X. These straight bars are ideal for use with Darklab RPG Grips 16% VAT included

CHARACTERISTICS • back slotted hole • Three height options TECHNICAL INFORMATION • 1018 low carbon steel • Blackened to prevent corrosion Frames that are made of material that is not magnetically permeable, such as brass or aluminum, must have a "harness" installed to connect...

Eikon conventional springs: They are designed to work with any conventional truss rod. The individual front springs and rear springs are slotted for easy installation and removal. Eikon conventional springs are sold flat and must be bent to fit the application. Precision ground drilling...

Eikon conventional springs: They are designed to work with any conventional truss rod. The individual front springs and rear springs are slotted for easy installation and removal. Eikon conventional springs are sold flat and must be bent to fit the application. Precision ground drilling...

Eikon conventional springs: They are designed to work with any conventional truss rod. The individual front springs and rear springs are slotted for easy installation and removal. Eikon conventional springs are sold flat and must be bent to fit the application. Precision ground drilling...

Eikon conventional springs: They are designed to work with any conventional truss rod. The individual front springs and rear springs are slotted for easy installation and removal. Eikon conventional springs are sold flat and must be bent to fit the application. Precision ground drilling...

Eikon conventional springs: They are designed to work with any conventional truss rod. The individual front springs and rear springs are slotted for easy installation and removal. Eikon conventional springs are sold flat and must be bent to fit the application. Precision ground drilling...

Designed for conventional rebar. Slotted for easy installation and removal Individual front springs and rear springs are slotted for easy installation and removal. Conventional springs are sold flat and must be bent to fit the application. 16% VAT included

Designed for conventional rebar. Slotted for easy installation and removal Individual front springs and rear springs are slotted for easy installation and removal. Conventional springs are sold flat and must be bent to fit the application. 16% VAT included

Tru-Spring springs are designed specifically for the Tru-Spring truss rod system. The springs are shorter than conventional springs and are not intended to be bent. All Eikon springs are slotted for easy installation and removal. Precision ground drilling of polished high carbon spring steel...

Tru-Spring springs are designed specifically for the Tru-Spring truss rod system. The springs are shorter than conventional springs and are not intended to be bent. All Eikon springs are slotted for easy installation and removal. Precision ground drilling of polished high carbon spring steel...

Tru-Spring springs are designed specifically for the Tru-Spring truss rod system. The springs are shorter than conventional springs and are not intended to be bent. All Eikon springs are slotted for easy installation and removal. Precision ground drilling of polished high carbon spring steel...

Tru-Spring springs are designed specifically for the Tru-Spring truss rod system. The springs are shorter than conventional springs and are not intended to be bent. All Eikon springs are slotted for easy installation and removal. Precision ground drilling of polished high carbon spring steel...

Tru-Spring springs are designed specifically for the Tru-Spring truss rod system. The springs are shorter than conventional springs and are not intended to be bent. All Eikon springs are slotted for easy installation and removal. Precision ground drilling of polished high carbon spring steel...

Tru-Spring springs are designed specifically for the Tru-Spring truss rod system. The springs are shorter than conventional springs and are not intended to be bent. All Eikon springs are slotted for easy installation and removal. Precision ground drilling of polished high carbon spring steel...

EDGE X REPLACEMENT GIVE KNOB Pressure knob Replacement give knob for the Fk Irons Spektra Edge-X. *This Knob does not convert the Edge to Edge X. 16% VAT included

2.5 Stroke for HM machines  16% VAT included

Engine for Bishop Rotary Does not include the machine or extra parts V6 is compatible with machines from 2015 onwards Official distributors Shipping throughout the Mexican Republic 16% VAT included

Replacement O-rings for the Cheyenne Hawk Thunder or Spirit machine 5 pieces of 13mm diameter per bag. 16% VAT included

Plunger Replacement bar or rods for Bishop's Fantom machine (threadless) Long bar - ideal for Cheyenne grip Short bar - ideal for standard tubes Official Distributors Shipping to the entire Mexican Republic 16% VAT included

Critical Current Eliminator Replacement • Full 6-month manufacturer's warranty 16% VAT included

3 different colors of screws so you can easily spot the difference between all Symbeos machine settings. Black, Magnum Gray, and Blue graphite. Durable, lightweight and highest quality components. Interchangeable with all Symbeos machine parts so you can easily assemble multiple Symbeos machines for...

Our adapter can be connected to any source with a plug input to operate the wireless pedal. • Works with any generation of Critical pedal. • Adds held pedal mode function • Powered by external power adapter. • Full 6-month manufacturer's warranty • Made...

FK IRONS / DARKLAB (Stroke, bearing) Interchangeable stroke for Xion machine to change the path of your needle. Available in: 1.8mm 2.5mm 3.2mm 3.7mm 16% VAT included